Everdure E5SSSLPC-08 Specifications

E5Operator ManualCarpet ExtractorEnglish EN*9003734*www.tennantco.com9003734Rev. 00 (03-2008)Model 9004198-230VHomeFind...Go To..

EN OPERATIONTennant E5 (03--07)102. Empty the recovery and solution tanks andthoroughly rinse with clean water (Figure 25).FIG. 253. Clean the vacuum

OPERATION EN11Tennant E5 (03--08)AFTER EVERY 100 HOURS OF USE1. Flush the solution system with white vinegar toremove any chemical deposits. Pour 1/2

EN OPERATIONTennant E5 (03--08)12TROUBLESHOOTINGPROBLEM CAUSE SOLUTIONMachine does not operate.Faulty power cord. Replace power cord.T ripped circuit

OPERATION EN13Tennant E5 (03--08)MACHINE SPECIFICATIONSMODEL E5LENGTH 680 mm with handle fol dedWIDTH 490 mmHEIGHT 709 mm with handle fol dedWEIGHT 46

EN OPERATIONTennant E5 (03--08)2This manual is furnished with each new model.It provides necessary operation and maintenanceinstructions.Read this man

OPERATION EN3Tennant E5 (03--08)SAFETY PRECAUTIONSThis machine is intended for commercial use. It isdesigned exclusively to clean carpet andupholstery

EN OPERATIONTennant E5 (03--08)4GROUNDING INSTRUCTIONSThis machine must be grounded. If it shouldelectrically malfunction, grounding provides a path o

OPERATION EN5Tennant E5 (03--08)MACHINE COMPONENTS12354876910111213141518171620242322262125191. Adjustable Control Handle2. Main Power On/Off Switch3.

EN OPERATIONTennant E5 (03--08)6MACHINE SETUPINSTALLING BRUSHFOR SAFETY: Before installing brush, turn offmachine and unplug power cord from wall outl

OPERATION EN7Tennant E5 (03--08)CONNECTING POWER CORD1. Plug the supplied power cord into the machine andattach the power cord to the strain relief cl

EN OPERATIONTennant E5 (03--08)82. Press the main power switch to the on ( I )position (Figure 12).3. Press the cleaning mode switch towards thevacuum

OPERATION EN9Tennant E5 (03--08)FIG. 1810. When transporting machine, roll the machine onboth the main and rear tilt wheels.FOR SAFETY: When transport